# Troubleshoot datacenter server https error ## Setup The datacenter server is maintained with Virtualmin. The domain causing the problem is "kipurchat.creature-go.com". The SSL certificate provider is Let's Encrypt. ## Problem When trying to open "kipurchat.creature-go.com" the web browser shows this error (first section and certificates cut out): ``` net::ERR_CERT_DATE_INVALID Subject: kipurchat.creature-go.com Issuer: R13 Expires on: 28.01.2026 Current date: 14.03.2026 Certificate Transparency: SCT Google 'Argon2026h1' log (Embedded in certificate, Verified) SCT Let's Encrypt 'Oak2026h1' (Embedded in certificate, Verified) ``` ## First own troubleshooting The Virtualmin webpage SSL Certificate In domain kipurchat.creature-go.com shows that renewal of the certificate failed: " SSL certificate providers like Let's Encrypt can be used to automatically request a valid cert for use by Virtualmin. This page can be used to request a new certificate, which will overwrite any other you currently have configured for this domain. However, SSL certificate providers require that your ownership of the certificate domain be validated by checking that this system hosts the website for the domain. This is done by placing a small temporary file under the website's document directory /home/admincg/domains/kipurchat.creature-go.com/public_html. Request certificate for Domains associated with this server kipurchat.creature-go.com Domain names listed here Also request wildcard certificate? SSL certificate provider Let's Encrypt Automatically renew certificate Yes No Send email on renewal Yes Only on failure No Hostname verification Attempt to request all hostnames, and fail if any cannot be validated Skip unresolvable hostnames, but fail if any remaining cannot be validated Exclude hostnames that cannot be validated from the certifcate Certificate hash type RSA Time since last renewal 0.00 months Last failed renewal 03/14/2026 11:39 AM Renewal failed due to Web-based validation failed : Saving debug log to /var/log/letsencrypt/letsencrypt.log Renewing an existing certificate for kipurchat.creature-go.com An unexpected error occurred: AttributeError: can't set attribute Ask for help or search for solutions at https://community.letsencrypt.org. See the logfile /var/log/letsencrypt/letsencrypt.log or re-run Certbot with -v for more details. DNS-based validation failed : Saving debug log to /var/log/letsencrypt/letsencrypt.log Renewing an existing certificate for kipurchat.creature-go.com An unexpected error occurred: AttributeError: can't set attribute Ask for help or search for solutions at https://community.letsencrypt.org. See the logfile /var/log/letsencrypt/letsencrypt.log or re-run Certbot with -v for more details. " ## Your tasks Please help me by running these tasks: ### Understand the root cause Why did the certificate renewal fail? ### Repair the SSL certificate setup Change the SSL certificate setup so that future renewals will work. ### Repair SSL connection If not already done by completing the task before, repair the SSL connection so that "kipurchat.creature-go.com" can be used again. --- # Podman shell script for AFFiNE service ## Motivation A Podman Pod is needed on a Linux server which provides an AFFiNE service. This Podman Pod needs to be created and started with a shell script which needs to be designed. The AFFiNE service will be used by humans and by AI agents; it will also be part of a design environment for designing a special MCP server for AFFiNE. ## Shell script requirements Requirements for the shell script: - Must use a container image with a Pinned Tag (for exact consistency) which points to the AFFiNE version 0.26.3. The name likely is something like "ghcr.io/toeverything/affine:0.26.3". - Must provide the AFFiNE web user interface at port 8092. - Must provide the GraphQL API. Background: The AFFiNE web and desktop apps use an internal GraphQL API to communicate with the backend. There is a /graphql endpoint but it is not documented for third-party use. - Must be in folder /home/pln/bin. - Must have the name create_pod_affine.sh The shell script shall be run by user pln which has permissions to run rootless pods. ## Shell script style The needed shell script must have the same style as other shell scripts on the server. These files are examples: /home/lwc/bin/create_pod_langflow.sh /home/krt/bin/create_pod_qdrant.sh ## Your tasks ### Ask first Before starting to design the shell script, ask between two and five questions to fully understand the situation, your tasks and the objectives. ### Identify the container image Find the container image with Pinned Tag pointing to AFFiNE version 0.26.3. ### Write the shell script Write the shell script. ### Test the shell script Run the shell script and test it. ### Redesign if necessary If the test failed, understand the problem, improve the shell script and go back to Test the shell script. Repeat this in a loop up to five times. ## Your objectives Your objectives are: - All requirements are fulfilled. - AFFiNE web user interface shows up at 127.0.0.1:8092. - The AFFiNE GraphQL API shows up under 127.0.0.1:8092 at /graphql or another link. ## Your behaviour If it is not possible to achieve your objectives, interrupt and ask me. Complete all your tasks without asking in between if you can achieve your objectives. --- # New Traefik route ## Motivation A new service runs on the server and needs to be provided to the internet by installing a new Traefik route. ## Traefik service Traefik runs as a systemd service in a Podman Pod. To end the service and Pod, run `/home/trf/bin/remove_pod_systemd_services.sh`. To start the Pod and the service, run `create_pod_traefik.sh`. ## Traefik configuration The Traefik configuration directory is `/home/trf/.local/share/traefik/`. The main configuration file is `/home/trf/.local/share/traefik/traefik.yml`. In the directory `/home/trf/.local/share/traefik/dynamic` are the .yml files for the individual routings. ## New service The new service for which the new Traefik route is needed: - Name is "affine" - Provided at 127.0.0.1:8092 ## Your tasks Your tasks are: - Ask questions if necessary to understand the situation and the tasks below. - Create the necessary file in `/home/trf/.local/share/traefik/dynamic`. - Update `/home/trf/.local/share/traefik/traefik.yml`. --- # Apache reverse proxy forwarding to another host ## Setup The setup comprises two servers which are connected via WireGuard. ### Linux server sv005.destengs.com - In a data center - Managed using Virtualmin - Two Virtual Servers: - kipurchat.creature-go.com - affine.creature-go.com - Uses Apache reverse proxy - WireGuard IP address 10.8.0.1 ### Linux server DesTEngSsv006 - Local server - Uses Traefik to route ingest traffic to microservices - WireGuard IP address 10.8.0.6 - Provides the AFFiNE microservice - Internal at 127.0.0.1:8092 ## Previous problems In the past I often faced problems with the Apache directives. ### SSL certificate renewal failed The Virtual Server kipurchat.creature-go.com was set up using Virtualmin some monthes ago. Then a forward was installed which routed the traffic of kipurchat.creature-go.com from sv005.destengs.com to DesTEngSsv006. When the automated SSL certificate renewal was triggered the renewal failed. The Apache directives file needed to be fixed so that the ACME check could succeed. ## Assistance for affine.creature-go.com forwarding I just created the Virtual Server affine.creature-go.com . https://affine.creature-go.com/ works, has a valid SSL certificate and shows the expected Virtualmin Welcome-Page. I would like to have your assistance to set up the forwarding for affine.creature-go.com to get a bullet-proof Apache directives file which also will allow the SSL certificate renewal in some weeks. ## Your tasks ### Interview Interview me to - Fully understand the situation - Clarify the objective - Obtain all files you need ### Update DesTEngSsv006 configuration Help me to update the DesTEngSsv006 configuration so that affine.creature-go.com forwarding works as expected and SSL certificate renewal will succeed. 1. The Apache VHost Config: Could you share the current contents of the Apache configuration file for affine.creature-go.com on sv005? (Usually found in /etc/apache2/sites-available/ or managed via Virtualmin's "Edit Directives" section). 2. Traefik's Entrypoint: On DesTEngSsv006, is Traefik listening for incoming traffic on port 80/443 over the WireGuard interface (10.8.0.6)? 3. Traefik Configuration: Have you already set up a router and service in Traefik for affine.creature-go.com? If so, could you share that snippet (labels in Docker or your YAML/TOML config)? 4. SSL Strategy: Is sv005 the only place where you want SSL to be terminated, or are you also trying to use Let's Encrypt on the Traefik side? (Standard practice here is to terminate at sv005 and send plain HTTP or "pseudo-HTTPS" over the tunnel). ## Interview answers 1. Attached is affine.creature-go.com.conf 2. Traefik is listening on 10.8.0.6:8080 3. Attached is the main Traefik config file traefik.yml from the DesTEngSsv006 directory /home/trf/.local/share/traefik and the three .yml config files {affine.yml, dashboard.yml, openwebui.yml} from the DesTEngSsv006 directory /home/trf/.local/share/traefik/dynamic/ 4. Terminate SSL at sv005 and send plain HTTP over the tunnel What about the already existing RewriteCond lines in the Apache config file? I would appreciate if you would update the complete affine.creature-go.com.conf file instead of giving me snippets which I have to insert at the hopefully correct position. Questions about both sections and : - You did remove but you did leave in - why didn't you take out both directories because they are not used? Any objections if I would remove the ? - There is no mail support at affine.creature-go.com so I plan to remove RewriteCond and RewriteRule for Webmail - any objections? Questions about section: - Why did you relocate the SSL Configuration block? --- # Wireguard problem Please help troubleshooting and repairing a Wireguard connection. ## Setup WireGuard IP-Addresses: 10.8.0.1 DesTEngSsv005 10.8.0.6 DesTEngSsv006 10.8.0.3 DesTEngSnb003 ### DesTEngSsv005 DesTEngSsv005 is a datacenter Linux server with public IP-address 65.108.193.31 . In the Wireguard setup the server is the bridge between an office server and a notebook. I am the system administrator and have root access. ### DesTEngSsv006 DesTEngSsv006 is an office Linux server with a dynamic IP-address for Internet access. ### DesTEngSnb003 DesTEngSnb003 is my personal Windows notebook with a dynamic IP-address for Internet access. ## Symptoms Today I noticed that from DesTEngSnb003 the Wireguard connection to DesTEngSsv006 is not working anymore: The connection could not be established. I can ping DesTEngSsv005 from DesTEngSnb003. The latest handshake with 10.8.0.6 happened 21 hours ago: ``` root@sv005 ~ # wg show interface: wg0 public key: Fww9ON7EvuRom7M9BN97bRpxduIM4V54z/Ij6eunrgo= private key: (hidden) listening port: 51820 peer: YUOO8IHL218cmeaS1c/VH9STQRGryrlWk0oXvtCbqFY= endpoint: 87.152.118.183:49669 allowed ips: 10.8.0.3/32 latest handshake: 4 seconds ago transfer: 21.22 MiB received, 633.64 MiB sent peer: XTC0cB4R3hurXh9NTIhPfDlam3ahrau21F/ezJUJSRs= endpoint: 89.244.105.89:49166 allowed ips: 10.8.0.6/32 latest handshake: 21 hours, 32 minutes, 20 seconds ago transfer: 1.13 GiB received, 115.96 MiB sent ``` The Wireguard connection was working well before, I am the only admin of all three machines and I have not intentionally changed any firewall settings or FORWARD chains. ```traceroute 10.8.0.6``` does not work on my notebook in a CMD window; likely because the notebook has Windows and not Linux. On the weekend I'm not in the office; therefore, I cannot check anything on DesTEngSsv006 now. Are there any helpful and promising checks I could do right now with my access limited to DesTEngSsv005 and DesTEngSnb003? The notebook can reach the hub: ``` C:\Users\tlg>tracert -d 10.8.0.6 Routenverfolgung zu 10.8.0.6 über maximal 30 Hops 1 50 ms 49 ms 49 ms 10.8.0.1 2 * * * Zeitüberschreitung der Anforderung. 3 * * * Zeitüberschreitung der Anforderung. 4 * * * Zeitüberschreitung der Anforderung. 5 * ^C ``` I started this: ``` root@sv005 ~ # ping 89.244.105.89 PING 89.244.105.89 (89.244.105.89) 56(84) bytes of data. ``` For more than one minute no answer arrived. So likely the office Internet connection is down. Thank you, I will proceed troubleshooting on Monday in the office. --- # New Git repository on DesTEngS Git server Please help with setting up a new Git repository on a Git server and in a Linux folder. ## DesTEngS Git server The DesTEngS Git server is at `git.destengs.com` and can be accessed via SSH with the `git` user and port `8085`. Example: The user pln did add a remote connection with `git remote add origin ssh://git@git.destengs.com:8085/pln/bin.git`. I have an account and my user name is 'tlg'. The Git server SW is Gitea. Gitea push-to-create is intentionally not enabled; therefore, new repositories were created via the Git server web interface up to now. ## The new Git repository The new Git repo will be used for my SW design topics, shall have the name DesTEngSsv006_swd and shall use SHA-256. I also want to use the Git repo for things which are common on GitHub repositories (like bug tracking and actions); however, the new repo will only be used by me and AI agents like you. On my Linux server DesTEngSsv006 my user name is 'tlg'. I created a folder /home/tlg/swd which shall become a Git repo which will be synced with the Git server repo; therefore, I want a SSH remote connection which would be created with `git remote add origin ssh://git@git.destengs.com:8085/tlg/DesTEngSsv006_swd.git`. ## Questions - Use your ask user questions tool to completely understand the situation and my requirements. - Do I have to manually set up the repo on the Git server first? - How should I set up bug tracking, actions and similar things? --- # Local Git repository setup Please help with setting up a local Git repository in a Linux folder and synchronizing it with a Git repository on a remote Git server. ## Remote Git server The remote Git server is at `git.destengs.com` and can be accessed via SSH with the `git` user and port `8085`. Example: The user pln did add a remote connection with `git remote add origin ssh://git@git.destengs.com:8085/pln/bin.git`. I have an account and my user name is 'wbg'. The Git server SW is Gitea. ## New Git repository on remote Git server Gitea push-to-create is intentionally not enabled; therefore, I created the desired new repository via the Git server web interface: - Name 'destengssv006_bin' - Issue Label Default - Object format sha256 I also created a new Token for access to wbg account via Gitea-API: - Token-name destengssv006 - Access: All (public, private and restricted) - │ API route │ Access │ activitypub │ no access │ issue │ read and write │ misc │ read │ notification │ read │ organization │ no access │ package │ no access │ repository │ read and write │ user │ read - Stored it on this server in /home/wbg/.gitea-token ## Local Git repository The folder /home/wbg/bin shall become a Git repo which must be synced with the remote Git server repository. SSH keys have been generated and the public used to communicate with the remote Git server via SSH without entering credentials. ## Your tasks 1. Initialize the local Git repository in the /home/wbg/bin with sha256, branch 'main'. Set global user name to 'wbg' and global user email to 'Thomas.Langer@destengs.com'. 2. Setup the SSH remote connection with `git remote add origin ssh://git@git.destengs.com:8085/wbg/destengssv006_bin.git`. 3. Make an initial commit with a reasonable .gitignore to test it.